Construction
PE Copolymer-Based Hot Melt Adhesive
Hot Melt Filler is a heat-sensitive, PE copolymer-based stick used for small superficial damage (scratches) to PE-coatings where the damage does not extend to the bare metal.
Installation is done with a standard gas torch. After eliminating all sharp edges, cleaning and preheating, the Hot Melt Filler is heated above the damaged area until becoming glossy.
Frequently Asked Questions
What is the Hot Melt Filler used for?
Hot Melt Filler is specifically designed for repairing small superficial damage and scratches on PE-coatings where the damage does not extend to the bare metal substrate.
What equipment is needed for installation?
Only a standard gas torch is required for installation. No special or expensive equipment is necessary, making the repair process simple and cost-effective.
What is the softening point of this hot melt adhesive?
The softening point is 90ºC (194ºF) according to the ASTM E-28 test method, ensuring reliable performance under standard operating conditions.
How strong is the adhesion of the Hot Melt Filler?
The product has excellent shear strength of 2.0Mpa at 23ºC (73ºF) according to ASTM D-1002, providing durable repairs that can withstand high shear forces.
What are the main advantages of using this product?
The main advantages include versatility, high economy, excellent adhesion to PE coatings, simple stick form for easy application, no special equipment requirements, and durable reconstruction of damaged coatings.
What preparation is needed before applying the filler?
Before application, you need to eliminate all sharp edges from the damaged area, thoroughly clean the surface, and preheat the area. Then heat the Hot Melt Filler above the damaged area until it becomes glossy.
CYCT
